Cerama-Dip 538-N Coating for Power Resistors and Rheostats
SKU: Cerama-Dip 538-N
Grade: ARMC-538-N
$111.20 to $1,463.25
NOTE: During cold weather conditions this product must ship in an insulated box. A $20.00 handling fee will be added to your cart.
Cerama-Dip 538-N is a single part, water-based, light-gray pigmented, inorganic-ceramic coating system used to electrically isolate high power, high temperature ceramic resistors. This advanced coating exceeds the temperature limitations of conventional epoxies, phenolics and silicones, and can be used in applications as high as 2600°F (1427°C).
Cerama-Dip 538-N is easily applied by dipping or brushing and cleans up prior to curing with warm water. Curing is accomplished by air-drying at room temperature for 1 hour, then step curing for 1-2 hours at 200°F and 350°F, respectively.
Cerama-Dip 538-N is odorless and contains no volatile organic compounds that may affect the environment. No outgassing will occur upon curing or during operation.
On the picture Cerama-Dip 538-N coats resistors.
Black and green pigments also available.
Cerama-Dip 538-N is a single part, water-based, light-gray pigmented, inorganic-ceramic coating system used to electrically isolate high power, high temperature ceramic resistors. This advanced coating exceeds the temperature limitations of conventional epoxies, phenolics and silicones, and can be used in applications as high as 2600°F (1427°C).
Cerama-Dip 538-N is easily applied by dipping or brushing and cleans up prior to curing with warm water. Curing is accomplished by air-drying at room temperature for 1 hour, then step curing for 1-2 hours at 200°F and 350°F, respectively.
Cerama-Dip 538-N is odorless and contains no volatile organic compounds that may affect the environment. No outgassing will occur upon curing or during operation.
On the picture Cerama-Dip 538-N coats resistors.
Black and green pigments also available.